Secuencia para una revisión completa de la bicicleta de carretera

20

Tengo una bicicleta de carretera que planeo revisar completamente pronto. Con los años, y con varias bicicletas, he revisado casi todos los componentes, pero nunca he logrado hacer esto para una bicicleta completa, de principio a fin.

¿Existe una secuencia óptima para una revisión de la bicicleta? O importa?


fuente
¿Es importante para ti desnudarse hasta un marco desnudo? ¿O está revisando un sistema a la vez?
Jay Bazuzi
Probablemente no se desnudará hasta quedar desnudo. No estoy seguro de que sea necesario.
¡No me gusta el título, pero no puedo pensar en uno mejor! Buena pregunta.
Neil Fein

Respuestas:

11

Tengo dos enlaces de lista de revisión que son geniales. Una de las listas de verificación que modifiqué para uso personal y que he incluido.

El primero es del United Bicycle Institute ( enlace de lista de verificación en PDF ): UBI es una de las principales escuelas de mecánica de bicicletas de EE. UU.

El que a continuación modifiqué del blog A Convenient Cycle (el blog ahora está muerto ...) y es lo que uso en mi tienda personal.

Wheel Systems:
[ ] Front Hub bearings greased.
[ ] Front Hub bearings adjusted to not be tight or loose.
[ ] Rear Hub bearings greased.
[ ] Rear Hub bearings adjusted to not be tight or loose.
[ ] All hubs locknuts secured.
[ ] Hubs inspected for bent axles and external evidence of internal problems.
[ ] Rims trued laterally to .5mm tolerance or better.
[ ] Rims inspected for damaged or other work needed.
[ ] Tires checked for proper wear and damage, proper mounting, and inflation.
[ ] Wheels mounted in proper alignment and secure.

Drive Train System:
[ ] Bottom Bracket greased
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket adjusted to not be tight or loose.
[ ] Bottom Bracket inspected for external evidence of internal problems.
[ ] Crank arms securely mounted.
[ ] Chainrings bolts secured.
[ ] Wobbling chainrings aligned.
[ ] Pedals lubricated
[ ] Pedals securely mounted.
[ ] Chain cleaned
[ ] Chain lubed and whipped down
[ ] Chain inspected for wear
[ ] Freewheel cleaned and rinsed
[ ] Freewheel inspected for wear
[ ] Freewheel lubricated.

Brake System:
[ ] Cables lubricated and replaced if worn.
[ ] Front Braking surface cleaned and checked for ware.
[ ] Rear Braking surface cleaned and checked for ware.
[ ] Brake calipers checked for mounting security.
[ ] Caliper arms and pivot/mounting bolts checked for damage.
[ ] Adjustable brake pivots adjusted for no play or binding.
[ ] Pivot nut/bolts checked for secure.
[ ] Brake caliper lubricated at pivots, springs, and cable adjuster barrels.
[ ] Brake barrels adjusters reseted.
[ ] Brake pads checked for wear and replaced if more than 50% worn.
[ ] Brake pad height set so as not to rub tire or hit partially below rim.
[ ] Pads set tangent [parallel] to rim.
[ ] New pads set with .5mm to 1.5mm toe to reduce squeal.
[ ] Pads clearance set to 1mm -2mm per side [except MTB type].
[ ] MTB pad clearance set so that when the pads contact the rim the lever clears the handlebar by a minimum of 1 inch.
[ ] Brake levers set to proper alignment and secure.
[ ] Brake level pivots, cable anchor pivots, and cable adjusters lubricated.
[ ] Cable removed and inspected for rust, frays, and kinks in the inner wire and housing.
[ ] Housings sized to proper length and ends finished with filing and end caps where fit.
[ ] Cables lubricated wherever they pass through housings.
[ ] Cable system stress tested by pulling brake lever fully to handlebar a minimum of ten times.
[ ] Cable end finished with cap or soldering.
[ ] Rims cleaned of lubricants and road grime.

Shift Systems:
[ ] Cables lubed and replaced if necessary
[ ] Rear derailleur removed and hanger checked for proper alignment.
[ ] Rear derailleur pivots, cable adjusters, and jockey wheels lubricated.
[ ] Rear derailleur inspected for damage and worn jockey wheels.
[ ] Rear derailleur mounted securely.
[ ] Front derailleur checked for proper mounting height and rotation.
[ ] Front derailleur checked for proper secure mounting.
[ ] Front derailleur pivots lubricated.
[ ] Derailleur cables removed and inspected for rust, frays, and kinks in the inner wires and housings.
[ ] Housings sized to proper length and ends finished with filing and end caps wherever they improve fit.
[ ] Cables lubricated wherever they pass through housings when appropriate.
[ ] Cables pre-stressed.
[ ] Chain length checked.
[ ] Rear derailleur limit screws set to allow shift to largest and smallest sprockets.
[ ] Rear derailleur checked for over shift at all gear combinations.
[ ] Front derailleur limit screws set for minimum clearance of the derailleur cage to the chain in high and low gear.
[ ] Front derailleur checked for over shift at all gear combinations.

Steering System:
[ ] Headset lubricated.
[ ] Headset adjusted to not be tight or loose.
[ ] Headset locknut secured.
[ ] Headset inspected for external evidence of damage, wear, or loose cups.
[ ] Fork inspected for damage.
[ ] Stem inspected for proper depth insertion, alignment, and secure.
[ ] Handlebars inspected for damage, proper alignment, and secure.

Miscellaneous:
[ ] Frame checked for damage.
[ ] Seat post checked for allowable minimum depth of insertion.
[ ] Seat post secure mounting checked.
[ ] Seat checked for proper alignment and secure mounting.
[ ] Accessories checked for mounting security and interference with moving parts or safety hazards.

Test Ride:
[ ] Brakes checked for stopping power and squeal.
[ ] Bicycle checked for tracking problems.
[ ] Derailleurs checked for performance and over shift.
[ ] Chain and freewheel cogs checked for skipping under load.
[ ] Bicycle checked for unusual noises.
Gary.Ray
fuente
2

Por lo general, empiezo quitando un marco hacia abajo. Dejaré los cables encendidos si no voy tan lejos, pero al menos desarme los auriculares y saque el BB. Una vez que llegue tan lejos, terminaré el cuadro y luego pasaré a las ruedas. Extraiga los rodamientos y verifique las bolas, obtenga nuevas si es necesario y vuelva a empacar los cubos. También limpio el cassette en este punto ya que está mayormente separado.

Nunca he tenido pedales que requieran una reconstrucción, pero creo que lo haría después de volver a poner las bielas.

Luego vuelva a armarlo.

curtismchale
fuente
2

Como los enlaces en el OP no funcionan, aquí está la lista de verificación de texto, y aquí está el PDF :

[ ] Front Hub berings greased.
[ ] Front Hub berings adjusted to not be tight or loose.
[ ] Rear Hub berings greased.
[ ] Rear Hub berings adjusted to not be tight or loose.
[ ] All hubs locknuts secured.
[ ] Hubs inspected for bent axles and external evidence of internal problems.
[ ] Rims trued laterally to .5mm tolerance or better.
[ ] Rims inspected for damaged or other work needed.
[ ] Tires checked for proper wear and damage, proper mounting, and inflation.
[ ] Wheels mounted in proper alignment and secure.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Drive Train System:
[ ] Bottom Bracket greased
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket adjusted to not be tight or loose.
[ ] Bottom Bracket inspected for external evidence of internal problems.
[ ] Crank arms securely mounted.
[ ] Chainrings bolts secured.
[ ] Wobbling chainrings aligned.
[ ] Pedals lubricated
[ ] Pedals securely mounted.
[ ] Chain cleaned
[ ] Chain lubed and whipped down
[ ] Chain inspected for wear
[ ] Freewheel cleaned and rinsed
[ ] Freewheel inspected for wear
[ ] Freewheel lubricated.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Steering System:
[ ] Headset lubricated.
[ ] Headset adjusted to not be tight or loose.
[ ] Headset locknut secured.
[ ] Headset inspected for external evidence of damage, wear, or loose cups.
[ ] Fork inspected for damage.
[ ] Stem inspected for proper depth insertion, alignment, and secure.
[ ] Handlebars inspected for damage, proper alignment, and secure.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Brake System:
[ ] Cables lubricated and replaced if worn.
[ ] Front Braking surface cleaned and checked for ware.
[ ] Rear Braking surface cleaned and checked for ware.
[ ] Brake calipers checked for mounting security.
[ ] Caliper arms and pivot/mounting bolts checked for damage.
[ ] Adjustable brake pivots adjusted for no play or binding.
[ ] Pivot nut/bolts checked for secure.
[ ] Brake caliper lubricated at pivots, springs, and cable adjuster barrels.
[ ] Brake barrels adjusters reseted.
[ ] Brake pads checked for wear and replaced if more than 50% worn.
[ ] Brake pad height set so as not to rub tire or hit partially below rim.
[ ] Pads set tangent [parallel] to rim.
[ ] New pads set with .5mm to 1.5mm toe to reduce squeal.
[ ] Pads clearance set to 1mm -2mm per side [except MTB type].
[ ] MTB pad clearance set so that when the pads contact the rim the lever clears the handlebar by a minimum of 1 inch.
[ ] Brake levers set to proper alignment and secure.
[ ] Brake level pivots, cable anchor pivots, and cable adjusters lubricated.
[ ] Cable removed and inspected for rust, frays, and kinks in the inner wire and housing.
[ ] Housings sized to proper length and ends finished with filing and end caps where fit.
[ ] Cables lubricated wherever they pass through housings.
[ ] Cable system stress tested by pulling brake lever fully to handlebar a minimum of ten times.
[ ] Cable end finished with cap or soldering.
[ ] Rims cleaned of lubricants and road grime.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Shift Systems:
[ ] Cables lubed and replaced if necessary
[ ] Rear derailleur removed and hanger checked for proper alignment.
[ ] Rear derailleur pivots, cable adjusters, and jockey wheels lubricated.
[ ] Rear derailleur inspected for damage and worn jockey wheels.
[ ] Rear derailleur mounted securely.
[ ] Front derailleur checked for proper mounting height and rotation.
[ ] Front derailleur checked for proper secure mounting.
[ ] Front derailleur pivots lubricated.
[ ] Derailleur cables removed and inspected for rust, frays, and kinks in the inner wires and housings.
[ ] Housings sized to proper length and ends finished with filing and end caps wherever they improve fit.
[ ] Cables lubricated wherever they pass through housings when appropriate.
[ ] Cables pre-stressed.
[ ] Chain length checked.
[ ] Rear derailleur limit screws set to allow shift to largest and smallest sprockets.
[ ] Rear derailleur checked for over shift at all gear combinations.
[ ] Front derailleur limit screws set for minimum clearance of the derailleur cage to the chain in high and low gear.
[ ] Front derailleur checked for over shift at all gear combinations.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Miscellaneous:
[ ] Frame checked for damage.
[ ] Seat post checked for allowable minimum depth of insertion.
[ ] Seat post secure mounting checked.
[ ] Seat checked for proper alignment and secure mounting.
[ ] Accessories checked for mounting security and interference with moving parts or safety hazards.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Test Ride:
[ ] Frame cleaned.
[ ] Frame waxed.
[ ] Frame checked for damage.
[ ] Brakes checked for stopping power and squeal.
[ ] Bicycle checked for tracking problems.
[ ] Derailleurs checked for performance and over shift.
[ ] Chain and freewheel cogs checked for skipping under load.
[ ] Bicycle checked for unusual noises.
Notes: These problems could not be repaired and/or are in need of further attention;
John Hunt
fuente
1

Comienzo con una comprobación básica de M: lo que está mal con la bicicleta. Haz una lista de las cosas que debes hacer. Eso significa una inspección minuciosa del cuadro en busca de daños / grietas: si el cuadro es una escritura, la bicicleta solo es donante de piezas y se despoja.

Comienzo eliminando todos los bits defectuosos y decido si serían útiles después de una reconstrucción o si necesitan reemplazo.

Una vez que todo está fuera de la bicicleta que no funciona, hago un juicio sobre si vale la pena arreglarlo. Evite hundir mucho tiempo en una bicicleta si es marginal. Hay muchas bicicletas por ahí, y aunque el sentimentalismo y la historia ayudan a mover el límite, aún debe ser selectivo.

Trabajar en cada subsistema por turno. Es decir, haría la BB perfecta y luego pasaría a las bielas. Luego rueda trasera, cassette, desviadores, cadena.

Siempre limpie las cosas antes de trabajar en ellas. Es más agradable trabajar con una bicicleta limpia. Entonces, primero haga las partes sucias, es decir, la transmisión, los cubos de las ruedas, el eje de las ruedas, etc.

Deje los detalles finales hasta más tarde. El sillín, el bartape, los reflectores, los cables internos para frenos / palancas de cambio y los frenos están hacia el final de la secuencia.

Finalmente, prueba la bicicleta. Debe conducirlo durante unos minutos, primero despacio, luego acelere y pruebe los frenos y los cambios.

Después de 4-6 semanas, también querrá ajustar los cables de freno y palanca de cambios, ya que se acoplan con el uso.

Criggie
fuente