Conexión de Strongswan (IKEv2) establecida, pero sin enrutamiento de tráfico

8

He visto este tipo de preguntas publicadas varias veces antes, pero hasta ahora, ninguna de ellas ha resuelto mi problema.

Estoy tratando de configurar una VPN IKEv2 en mi servidor Ubuntu para usar con mi Windows Phone usando Strongswan. La conexión parece estar configurada correctamente, pero no se enrutan los paquetes y no puedo hacer ping a la dirección IP del cliente VPN.

La red interna de mi servidor es 192.168.1.0/24, y la IP de mi servidor es 192.168.1.110 y detrás de NAT.

/ var / log / syslog

May  8 09:50:01 seanco-server charon: 16[NET] received packet: from 166.147.118.120[13919] to 192.168.1.110[500]
May  8 09:50:01 seanco-server charon: 16[ENC] parsed IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) V V V V ]
May  8 09:50:01 seanco-server charon: 16[ENC] received unknown vendor id: 1e:2b:51:69:05:99:1c:7d:7c:96:fc:bf:b5:87:e4:61:00:00:00:09
May  8 09:50:01 seanco-server charon: 16[ENC] received unknown vendor id: fb:1d:e3:cd:f3:41:b7:ea:16:b7:e5:be:08:55:f1:20
May  8 09:50:01 seanco-server charon: 16[ENC] received unknown vendor id: 26:24:4d:38:ed:db:61:b3:17:2a:36:e3:d0:cf:b8:19
May  8 09:50:01 seanco-server charon: 16[ENC] received unknown vendor id: 01:52:8b:bb:c0:06:96:12:18:49:ab:9a:1c:5b:2a:51:00:00:00:02
May  8 09:50:01 seanco-server charon: 16[IKE] 166.147.118.120 is initiating an IKE_SA
May  8 09:50:01 seanco-server charon: 16[IKE] local host is behind NAT, sending keep alives
May  8 09:50:01 seanco-server charon: 16[IKE] remote host is behind NAT
May  8 09:50:01 seanco-server charon: 16[IKE] sending cert request for "C=xx, ST=xx, L=xxx, O=xxx, CN=xxx, E=xxx"
May  8 09:50:01 seanco-server charon: 16[ENC] generating IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(MULT_AUTH) ]
May  8 09:50:01 seanco-server charon: 16[NET] sending packet: from 192.168.1.110[500] to 166.147.118.120[13919]
May  8 09:50:01 seanco-server charon: 08[NET] received packet: from 166.147.118.120[1282] to 192.168.1.110[4500]
May  8 09:50:01 seanco-server charon: 08[ENC] unknown attribute type INTERNAL_IP4_SERVER
May  8 09:50:01 seanco-server charon: 08[ENC] unknown attribute type INTERNAL_IP6_SERVER
May  8 09:50:01 seanco-server charon: 08[ENC] parsed IKE_AUTH request 1 [ IDi CERTREQ N(MOBIKE_SUP) CP(ADDR DNS NBNS SRV ADDR6 DNS6 SRV6) SA TSi TSr ]
May  8 09:50:01 seanco-server charon: 08[IKE] received cert request for "C=xx, ST=xx, L=xxx, O=xxx, CN=xxx, E=xxx"
May  8 09:50:01 seanco-server charon: 08[IKE] received 31 cert requests for an unknown ca
May  8 09:50:01 seanco-server charon: 08[CFG] looking for peer configs matching 192.168.1.110[%any]...166.147.118.120[10.212.235.245]
May  8 09:50:01 seanco-server charon: 08[CFG] selected peer config 'windows-phone-vpn'
May  8 09:50:01 seanco-server charon: 08[IKE] initiating EAP-Identity request
May  8 09:50:01 seanco-server charon: 08[IKE] peer supports MOBIKE
May  8 09:50:01 seanco-server charon: 08[IKE] authentication of 'steakscorp.org' (myself) with RSA signature successful
May  8 09:50:01 seanco-server charon: 08[IKE] sending end entity cert "D=xxx, C=xx, CN=xxx, E=xxx"
May  8 09:50:01 seanco-server charon: 08[ENC] generating IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/ID ]
May  8 09:50:01 seanco-server charon: 08[NET] sending packet: from 192.168.1.110[4500] to 166.147.118.120[1282]
May  8 09:50:02 seanco-server charon: 10[NET] received packet: from 166.147.118.120[1282] to 192.168.1.110[4500]
May  8 09:50:02 seanco-server charon: 10[ENC] parsed IKE_AUTH request 2 [ EAP/RES/ID ]
May  8 09:50:02 seanco-server charon: 10[IKE] received EAP identity 'Windows Phone\jinhai'
May  8 09:50:02 seanco-server charon: 10[IKE] initiating EAP_MSCHAPV2 method (id 0xA5)
May  8 09:50:02 seanco-server charon: 10[ENC] generating IKE_AUTH response 2 [ EAP/REQ/MSCHAPV2 ]
May  8 09:50:02 seanco-server charon: 10[NET] sending packet: from 192.168.1.110[4500] to 166.147.118.120[1282]
May  8 09:50:02 seanco-server charon: 09[NET] received packet: from 166.147.118.120[1282] to 192.168.1.110[4500]
May  8 09:50:02 seanco-server charon: 09[ENC] parsed IKE_AUTH request 3 [ EAP/RES/MSCHAPV2 ]
May  8 09:50:02 seanco-server charon: 09[ENC] generating IKE_AUTH response 3 [ EAP/REQ/MSCHAPV2 ]
May  8 09:50:02 seanco-server charon: 09[NET] sending packet: from 192.168.1.110[4500] to 166.147.118.120[1282]
May  8 09:50:02 seanco-server charon: 11[NET] received packet: from 166.147.118.120[1282] to 192.168.1.110[4500]
May  8 09:50:02 seanco-server charon: 11[ENC] parsed IKE_AUTH request 4 [ EAP/RES/MSCHAPV2 ]
May  8 09:50:02 seanco-server charon: 11[IKE] EAP method EAP_MSCHAPV2 succeeded, MSK established
May  8 09:50:02 seanco-server charon: 11[ENC] generating IKE_AUTH response 4 [ EAP/SUCC ]
May  8 09:50:02 seanco-server charon: 11[NET] sending packet: from 192.168.1.110[4500] to 166.147.118.120[1282]
May  8 09:50:02 seanco-server charon: 12[NET] received packet: from 166.147.118.120[1282] to 192.168.1.110[4500]
May  8 09:50:02 seanco-server charon: 12[ENC] parsed IKE_AUTH request 5 [ AUTH ]
May  8 09:50:02 seanco-server charon: 12[IKE] authentication of '10.212.235.245' with EAP successful
May  8 09:50:02 seanco-server charon: 12[IKE] authentication of 'steakscorp.org' (myself) with EAP
May  8 09:50:02 seanco-server charon: 12[IKE] IKE_SA windows-phone-vpn[2] established between 192.168.1.110[steakscorp.org]...166.147.118.120[10.212.235.245]
May  8 09:50:02 seanco-server charon: 12[IKE] scheduling reauthentication in 10200s
May  8 09:50:02 seanco-server charon: 12[IKE] maximum IKE_SA lifetime 10740s
May  8 09:50:02 seanco-server charon: 12[IKE] peer requested virtual IP %any6
May  8 09:50:02 seanco-server charon: 12[CFG] reassigning offline lease to 'Windows Phone\jinhai'
May  8 09:50:02 seanco-server charon: 12[IKE] assigning virtual IP 10.8.0.1 to peer 'Windows Phone\jinhai'
May  8 09:50:02 seanco-server charon: 12[IKE] CHILD_SA windows-phone-vpn{2} established with SPIs c214680b_i a1cbebd2_o and TS 0.0.0.0/0[udp/l2f] === 10.8.0.1/32[udp]
May  8 09:50:02 seanco-server vpn: + 10.212.235.245 10.8.0.1/32 == 166.147.118.120 -- 192.168.1.110 == 0.0.0.0/0
May  8 09:50:02 seanco-server charon: 12[ENC] generating IKE_AUTH response 5 [ AUTH CP(ADDR DNS DNS) SA TSi TSr N(AUTH_LFT) N(MOBIKE_SUP) N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_6_ADDR) ]
May  8 09:50:02 seanco-server charon: 12[NET] sending packet: from 192.168.1.110[4500] to 166.147.118.120[1282]
May  8 09:50:22 seanco-server charon: 16[IKE] sending keep alive
May  8 09:50:22 seanco-server charon: 16[NET] sending packet: from 192.168.1.110[4500] to 166.147.118.120[1282]
May  8 09:50:32 seanco-server charon: 10[IKE] sending DPD request
May  8 09:50:32 seanco-server charon: 10[ENC] generating INFORMATIONAL request 0 [ N(NATD_S_IP) N(NATD_D_IP) ]

/etc/ipsec.conf

config setup
        strictcrlpolicy = no
        charonstart = yes
        plutostart = no

conn windows-phone-vpn
        auto = route
        compress = no
        dpdaction = clear
        pfs = no
        keyexchange = ikev2
        type = tunnel
        left = %any
        leftfirewall = yes
        leftauth = pubkey
        leftid = steakscorp.org
        leftcert = /etc/apache2/ssl/start-ssl.crt
        leftca = /etc/apache2/ssl/start-ssl-ca.pem
        leftsendcert = always
        leftsubnet = 0.0.0.0/0
        right = %any
        rightauth = eap-mschapv2
        eap_identity = %any
        rightca = /etc/ipsec.d/cacerts/vpnca.pem
        rightsendcert = ifasked
        rightsourceip = 10.8.0.0/24
        #leftprotoport = 17/1701
        #rightprotoport = 17/%any

ifconfig

eth1      Link encap:Ethernet  HWaddr aa:00:04:00:0a:04
          inet addr:192.168.1.110  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21e:4fff:feaa:1577/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:157187 errors:0 dropped:0 overruns:0 frame:0
          TX packets:162827 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:121434663 (121.4 MB)  TX bytes:129069773 (129.0 MB)
          Interrupt:21 Memory:fe9e0000-fea00000

ham0      Link encap:Ethernet  HWaddr 7a:79:19:da:fb:84
          inet addr:25.218.251.132  Bcast:25.255.255.255  Mask:255.0.0.0
          inet6 addr: fe80::7879:19ff:feda:fb84/64 Scope:Link
          inet6 addr: 2620:9b::19da:fb84/96 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1404  Metric:1
          RX packets:1622 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3115 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:500
          RX bytes:384780 (384.7 KB)  TX bytes:1249410 (1.2 MB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:6554 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6554 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2036987 (2.0 MB)  TX bytes:2036987 (2.0 MB)

iptables

# Generated by iptables-save v1.4.12 on Fri May  9 10:33:46 2014
*mangle
:PREROUTING ACCEPT [604388:58921019]
:INPUT ACCEPT [4937028:2589137657]
:FORWARD ACCEPT [22:1366]
:OUTPUT ACCEPT [3919078:5188868578]
:POSTROUTING ACCEPT [4008714:5195778648]
:AS0_MANGLE_PRE_REL_EST - [0:0]
:AS0_MANGLE_TUN - [0:0]
-A PREROUTING -m state --state RELATED,ESTABLISHED -j AS0_MANGLE_PRE_REL_EST
-A PREROUTING -i as0t+ -j AS0_MANGLE_TUN
-A AS0_MANGLE_PRE_REL_EST -j ACCEPT
-A AS0_MANGLE_TUN -j MARK --set-xmark 0x2000000/0xffffffff
-A AS0_MANGLE_TUN -j ACCEPT
COMMIT
# Completed on Fri May  9 10:33:46 2014
# Generated by iptables-save v1.4.12 on Fri May  9 10:33:46 2014
*filter
:INPUT ACCEPT [1737:217459]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [16831:20344894]
:AS0_ACCEPT - [0:0]
:AS0_IN - [0:0]
:AS0_IN_POST - [0:0]
:AS0_IN_PRE - [0:0]
:AS0_OUT - [0:0]
:AS0_OUT_LOCAL - [0:0]
:AS0_OUT_S2C - [0:0]
:AS0_U_ADMIN_IN - [0:0]
:AS0_U_USERLOCA_IN - [0:0]
:AS0_WEBACCEPT - [0:0]
:fail2ban-apache - [0:0]
:fail2ban-apache-404 - [0:0]
:fail2ban-apache-noscript - [0:0]
:fail2ban-apache-overflows - [0:0]
:fail2ban-apache-postflood - [0:0]
:fail2ban-ip-blocklist - [0:0]
:fail2ban-repeatoffender - [0:0]
:fail2ban-ssh - [0:0]
:fail2ban-ssh-ddos - [0:0]
-A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache-404
-A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache-noscript
-A INPUT -m state --state RELATED,ESTABLISHED -j AS0_ACCEPT
-A INPUT -i lo -j AS0_ACCEPT
-A INPUT -m mark --mark 0x2000000/0x2000000 -j AS0_IN_PRE
-A INPUT -p udp -m state --state NEW -m udp --dport 1194 -j AS0_ACCEPT
-A INPUT -m state --state RELATED,ESTABLISHED -j AS0_WEBACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 943 -j AS0_WEBACCEPT
-A INPUT -p tcp -j fail2ban-ip-blocklist
-A INPUT -p tcp -j fail2ban-repeatoffender
-A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh-ddos
-A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache-postflood
-A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache-overflows
-A INPUT -p tcp -m multiport --dports 80,443 -j fail2ban-apache
-A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh
-A FORWARD -m state --state RELATED,ESTABLISHED -j AS0_ACCEPT
-A FORWARD -m mark --mark 0x2000000/0x2000000 -j AS0_IN_PRE
-A FORWARD -o as0t+ -j AS0_OUT_S2C
-A OUTPUT -o as0t+ -j AS0_OUT_LOCAL
-A AS0_ACCEPT -j ACCEPT
-A AS0_IN -d 10.0.8.1/32 -j ACCEPT
-A AS0_IN -j AS0_IN_POST
-A AS0_IN_POST -o as0t+ -j AS0_OUT
-A AS0_IN_POST -j DROP
-A AS0_IN_PRE -d 192.168.0.0/16 -j AS0_IN
-A AS0_IN_PRE -d 172.16.0.0/12 -j AS0_IN
-A AS0_IN_PRE -d 10.0.0.0/8 -j AS0_IN
-A AS0_IN_PRE -j ACCEPT
-A AS0_OUT -j DROP
-A AS0_OUT_LOCAL -p icmp -m icmp --icmp-type 5 -j DROP
-A AS0_OUT_LOCAL -j ACCEPT
-A AS0_OUT_S2C -j AS0_OUT
-A AS0_U_ADMIN_IN -d 192.168.1.0/24 -j ACCEPT
-A AS0_U_ADMIN_IN -j AS0_IN_POST
-A AS0_U_USERLOCA_IN -d 192.168.1.0/24 -j ACCEPT
-A AS0_U_USERLOCA_IN -j AS0_IN_POST
-A AS0_WEBACCEPT -j ACCEPT
-A fail2ban-apache -j RETURN
-A fail2ban-apache-404 -j RETURN
-A fail2ban-apache-noscript -j RETURN
-A fail2ban-apache-overflows -j RETURN
-A fail2ban-apache-postflood -j RETURN
-A fail2ban-ip-blocklist -j RETURN
-A fail2ban-repeatoffender -j RETURN
-A fail2ban-ssh -j RETURN
-A fail2ban-ssh-ddos -j RETURN
COMMIT
# Completed on Fri May  9 10:33:46 2014
# Generated by iptables-save v1.4.12 on Fri May  9 10:33:46 2014
*nat
:PREROUTING ACCEPT [906:84714]
:INPUT ACCEPT [860:81590]
:OUTPUT ACCEPT [233:50740]
:POSTROUTING ACCEPT [233:50740]
:AS0_NAT - [0:0]
:AS0_NAT_POST_REL_EST - [0:0]
:AS0_NAT_PRE - [0:0]
:AS0_NAT_PRE_REL_EST - [0:0]
:AS0_NAT_TEST - [0:0]
-A PREROUTING -m state --state RELATED,ESTABLISHED -j AS0_NAT_PRE_REL_EST
-A POSTROUTING -m state --state RELATED,ESTABLISHED -j AS0_NAT_POST_REL_EST
-A POSTROUTING -m mark --mark 0x2000000/0x2000000 -j AS0_NAT_PRE
-A POSTROUTING -d 192.168.2.0/24 -o ppp0 -j MASQUERADE
-A POSTROUTING -s 10.8.0.0/24 -o eth1 -m policy --dir out --pol ipsec -j ACCEPT
-A POSTROUTING -s 10.8.0.0/24 -o eth1 -j MASQUERADE
-A AS0_NAT -o eth1 -j SNAT --to-source 192.168.1.110
-A AS0_NAT -o ham0 -j SNAT --to-source 25.218.251.132
-A AS0_NAT -o tun0 -j SNAT --to-source 10.8.0.1
-A AS0_NAT -j ACCEPT
-A AS0_NAT_POST_REL_EST -j ACCEPT
-A AS0_NAT_PRE -d 192.168.0.0/16 -j AS0_NAT_TEST
-A AS0_NAT_PRE -d 172.16.0.0/12 -j AS0_NAT_TEST
-A AS0_NAT_PRE -d 10.0.0.0/8 -j AS0_NAT_TEST
-A AS0_NAT_PRE -j AS0_NAT
-A AS0_NAT_PRE_REL_EST -j ACCEPT
-A AS0_NAT_TEST -o as0t+ -j ACCEPT
-A AS0_NAT_TEST -d 10.0.8.0/24 -j ACCEPT
-A AS0_NAT_TEST -j AS0_NAT
COMMIT
# Completed on Fri May  9 10:33:46 2014

política ip xfrm

src 10.8.0.1/32 dst 0.0.0.0/0 proto udp dport 1701
        dir fwd priority 1920
        tmpl src 166.147.118.120 dst 192.168.1.110
                proto esp reqid 3 mode tunnel
src 10.8.0.1/32 dst 0.0.0.0/0 proto udp dport 1701
        dir in priority 1920
        tmpl src 166.147.118.120 dst 192.168.1.110
                proto esp reqid 3 mode tunnel
src 0.0.0.0/0 dst 10.8.0.1/32 proto udp sport 1701
        dir out priority 1920
        tmpl src 192.168.1.110 dst 166.147.118.120
                proto esp reqid 3 mode tunnel

Algunas cosas me parecen un poco extrañas (¿no debería aparecer un ipsec0 o algo así cuando se establece la conexión?), Pero estoy perplejo en este punto y realmente agradecería algo de ayuda.

Editar : Comentó líneas de protoport y eliminó la interfaz tun0.

ubuntu ipsec strongswan vpn Jinhai
fuente
1
Definitivamente deberías deshacerte de las left|rightprotoportopciones. Con esos valores se usan cuando se usa IKEv1 / L2TP / IPsec, que no es así, está usando IKEv2 con IPsec simple. ¿Por qué hay un dispositivo TUN que tiene asignada la dirección IP del cliente? Lectura de reenvío y túnel dividido en la wiki de strongSwan también podría ayudar.
ecdsa
Se corrigieron las configuraciones (tun0 ya no está activo y las opciones de protoport han sido comentadas). Echaré un vistazo al artículo wiki nuevamente e intenté configurar NAT en mi interfaz izquierda con: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth1 -m policy --dir fuera --pol ipsec -j ACEPTAR iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth1 -j MASQUERADE ... pero hasta ahora, nada ha cambiado.
Jinhai
Sin embargo, noté un "-A POSTROUTING -d 192.168.2.0/24 -o ppp0 -j MASQUERADE" en mi iptables desde mi VPN L2TP / PPP, y eso funciona. Tal vez necesito agregar un equivalente para mi red IKEv2 y 10.8.0.0/24, pero ¿qué interfaz usaría? (Lo siento, un poco tonto cuando se trata de iptables)
Jinhai

Respuestas:

3

Necesitas:

>$ iptables -t nat -A POSTROUTING -o eth0 ! -p esp -j SNAT --to-source "your VPN host IP"
>$ service iptables save
>$ service iptables restart
>$ service ipsec restart
Alex G.
fuente
55
¿Por qué soluciona esto su problema?
Ryan Shillington
1

¿Ha habilitado el reenvío de ipv4? 

$sudo sysctl -w net.ipv4.ip_forward=1

¿Has añadido una regla de POSTROUTING MASQUERADE?

$sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
MemCtrl
fuente
Sí y sí (aunque mi adaptador es eth1 en su lugar).
Jinhai
¿Puedes publicar la tabla de enrutamiento del cliente?
MemCtrl
No puedo, pero estoy bastante seguro de que este es el problema: mi servidor no muestra ningún tráfico en la red privada 10.8.0.0/24 desde el teléfono cuando está conectado e intentando acceder a Internet. ¿Hay algo que pueda agregar del lado del servidor para agregar una ruta al exterior en el cliente?
Jinhai