ADVERTENCIA: no se ha habilitado ningún método de verificación del certificado del servidor

9

Traté de instalar openvpn en debian squeez (servidor) y conectarme desde mi fedora 17 como (cliente). Aquí está mi configuración:

configuración del servidor

# Server TCP
proto tcp
port 1194
dev tun

# Keys and certificates
ca /etc/openvpn/easy-rsa/keys/ca.crt
cert /etc/openvpn/easy-rsa/keys/server.crt
key /etc/openvpn/easy-rsa/keys/server.key
dh /etc/openvpn/easy-rsa/keys/dh1024.pem

# Network
# Virtual address of the VPN network
server 192.170.70.0 255.255.255.0
# This line adds the client to the router network server
push "route 192.168.1.0 255.255.255.0"
# Create a route server to the tun interface
#route 192.170.70.0 255.255.255.0

# Security
keepalive 10 120
# type of data encryption
cipher AES-128-CBC
# enabling compression
comp-lzo
# maximum number of clients allowed
max-clients 10
# no user and group specific to the use of the VPN
user nobody
group nogroup

# to make persistent connection
persist-key
persist-tun

# Log of the OpenVPN status
status /var/log/openvpn-status.log

# logs openvpnlog /var/log/openvpn.log
log-append /var/log/openvpn.log

# verbosity
verb 5

configuración del cliente

client
dev tun
proto tcp-client
remote <my server wan IP> 1194
resolv-retry infinite
cipher AES-128-CBC

# Keys
ca ca.crt
cert client.crt
key client.key

# Security
nobind
persist-key
persist-tun
comp-lzo
verb 3

Mensaje del cliente host (fedora 17) en el archivo de registro /var/log/messages:

Dec  6 21:56:00 GlobalTIC NetworkManager[691]: <info> Starting VPN service 'openvpn'...
Dec  6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN service 'openvpn' started (org.freedesktop.NetworkManager.openvpn), PID 7470
Dec  6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN service 'openvpn' appeared; activating connections
Dec  6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN plugin state changed: starting (3)
Dec  6 21:56:01 GlobalTIC NetworkManager[691]: <info> VPN connection 'Connexion VPN 1' (Connect) reply received.
Dec  6 21:56:01 GlobalTIC nm-openvpn[7472]: OpenVPN 2.2.2 x86_64-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] built on Sep  5 2012
Dec  6 21:56:01 GlobalTIC nm-openvpn[7472]:[COLOR="Red"][U][B] WARNING: No server certificate verification method has been enabled.[/B][/U][/COLOR]  See http://openvpn.net/howto.html#mitm for more info.
Dec  6 21:56:01 GlobalTIC nm-openvpn[7472]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec  6 21:56:01 GlobalTIC nm-openvpn[7472]:[COLOR="Red"] WARNING: file '/home/login/client/client.key' is group or others accessible[/COLOR]
Dec  6 21:56:01 GlobalTIC nm-openvpn[7472]: UDPv4 link local: [undef]
Dec  6 21:56:01 GlobalTIC nm-openvpn[7472]: UDPv4 link remote: [COLOR="Red"]<my server wan IP>[/COLOR]:1194
Dec  6 21:56:01 GlobalTIC nm-openvpn[7472]: [COLOR="Red"]read UDPv4 [ECONNREFUSED]: Connection refused (code=111)[/COLOR]
Dec  6 21:56:03 GlobalTIC nm-openvpn[7472]: [COLOR="Red"]read UDPv4[/COLOR] [ECONNREFUSED]: Connection refused (code=111)
Dec  6 21:56:07 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Dec  6 21:56:15 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Dec  6 21:56:31 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Dec  6 21:56:41 GlobalTIC NetworkManager[691]: <warn> VPN connection 'Connexion VPN 1' (IP Conf[/CODE]

ifconfig en el servidor host (debian):

ifconfig 
eth0      Link encap:Ethernet  HWaddr 08:00:27:16:21:ac  
          inet addr:192.168.1.6  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe16:21ac/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9059 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5660 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:919427 (897.8 KiB)  TX bytes:1273891 (1.2 MiB)
tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:192.170.70.1  P-t-P:192.170.70.2  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifconfig en el host del cliente (fedora 17)

as0t0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet 5.5.0.1  netmask 255.255.252.0  destination 5.5.0.1
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 200  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2  bytes 321 (321.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

as0t1: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet 5.5.4.1  netmask 255.255.252.0  destination 5.5.4.1
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 200  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2  bytes 321 (321.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

as0t2: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet 5.5.8.1  netmask 255.255.252.0  destination 5.5.8.1
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 200  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2  bytes 321 (321.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

as0t3: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet 5.5.12.1  netmask 255.255.252.0  destination 5.5.12.1
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 200  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2  bytes 321 (321.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

**p255p1**: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.2  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::21d:baff:fe20:b7e6  prefixlen 64  scopeid 0x20<link>
        ether 00:1d:ba:20:b7:e6  txqueuelen 1000  (Ethernet)
        RX packets 4842070  bytes 3579798184 (3.3 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3996158  bytes 2436442882 (2.2 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 16

p255p1 es etiqueta para interfaz eth0

y

en el servidor:

root@hoteserver:/etc/openvpn# tree
.
├── client
│** ├── ca.crt
│** ├── client.conf
│** ├── client.crt
│** ├── client.csr
│** ├── client.key
│** ├── client.ovpn
│*
│** 
├── easy-rsa
│** ├── build-ca
│** ├── build-dh
│** ├── build-inter
│** ├── build-key
│** ├── build-key-pass
│** ├── build-key-pkcs12
│** ├── build-key-server
│** ├── build-req
│** ├── build-req-pass
│** ├── clean-all
│** ├── inherit-inter
│** ├── keys
│** │** ├── 01.pem
│** │** ├── 02.pem
│** │** ├── ca.crt
│** │** ├── ca.key
│** │** ├── client.crt
│** │** ├── client.csr
│** │** ├── client.key
│** │** ├── dh1024.pem
│** │** ├── index.txt
│** │** ├── index.txt.attr
│** │** ├── index.txt.attr.old
│** │** ├── index.txt.old
│** │** ├── serial
│** │** ├── serial.old
│** │** ├── server.crt
│** │** ├── server.csr
│** │** └── server.key
│** ├── list-crl
│** ├── Makefile
│** ├── openssl-0.9.6.cnf.gz
│** ├── openssl.cnf
│** ├── pkitool
│** ├── README.gz
│** ├── revoke-full
│** ├── sign-req
│** ├── vars
│** └── whichopensslcnf
├── openvpn.log
├── openvpn-status.log
├── server.conf
└── update-resolv-conf

en el cliente:

[login@hoteclient openvpn]$ tree 
.
|-- easy-rsa
|   |-- 1.0
|   |   |-- build-ca
|   |   |-- build-dh
|   |   |-- build-inter
|   |   |-- build-key
|   |   |-- build-key-pass
|   |   |-- build-key-pkcs12
|   |   |-- build-key-server
|   |   |-- build-req
|   |   |-- build-req-pass
|   |   |-- clean-all
|   |   |-- list-crl
|   |   |-- make-crl
|   |   |-- openssl.cnf
|   |   |-- README
|   |   |-- revoke-crt
|   |   |-- revoke-full
|   |   |-- sign-req
|   |   `-- vars
|   `-- 2.0
|       |-- build-ca
|       |-- build-dh
|       |-- build-inter
|       |-- build-key
|       |-- build-key-pass
|       |-- build-key-pkcs12
|       |-- build-key-server
|       |-- build-req
|       |-- build-req-pass
|       |-- clean-all
|       |-- inherit-inter
|       |-- keys [error opening dir]
|       |-- list-crl
|       |-- Makefile
|       |-- openssl-0.9.6.cnf
|       |-- openssl-0.9.8.cnf
|       |-- openssl-1.0.0.cnf
|       |-- pkitool
|       |-- README
|       |-- revoke-full
|       |-- sign-req
|       |-- vars
|       `-- whichopensslcnf
|-- keys -> ./easy-rsa/2.0/keys/
`-- server.conf

¿Es la fuente del problema cipher AES-128-CBC, proto tcp-cliento UDP o la interfaz p255p1en Fedora17 o esa autenticación de archivo ta.keyno se encuentra?

debian fedora openvpn tmedtcom
fuente

Respuestas:

2

Primero, debe cambiar los permisos en su /home/login/client/client.keyarchivo para que no sea accesible a un grupo u otros.

chmod 400 /home/login/client/client.key

Luego, como se describe aquí , debe implementar un método para verificar que sus clientes se conectan al servidor correcto y que no es posible un ataque de intermediario.

Teissler
fuente
2
Será bueno si
publicas
1

Aquí hay una lista completa de problemas y debe tomarse en serio las advertencias dadas por OpenVPN. Pero solo hay advertencias y no la razón de su problema para obtener una conexión. El complemento openvpn de NetworkManager está intentando conectarse usando UDP. No sé qué relación tiene su client.conf con la configuración real de su cliente. ¿Se utilizó para importar la configuración de vpn en NetworkManager?
De todos modos, debe marcar la casilla de verificación de conexión TCP en el cuadro de diálogo de configuración avanzada de su perfil de conexión VPN.
Como no parece usar tls-auth en el cliente ni en el lado del servidor, no debería faltar ningún archivo ta.key (pero usar tls-auth es una buena idea).
El cifrado parece ser el mismo en ambos lados y no debería ser un problema.
Realmente sugiero averificar el certificado del servidor , como lo indicó morlix.

Enno Gröper
fuente
1

Para deshacerse de la No server certificate verification method has been enabledadvertencia, genere sus certificados de cliente y servidor con la extendedKeyUsageextensión correcta y agréguelos remote-cert-tls servera los del cliente openvpn.conf.

Agregue dos secciones a su CA openssl.cnf:

[server_cert]
basicConstraints = CA:FALSE
nsCertType = server
nsComment = "OpenSSL Generated Server Certificate"
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid,issuer:always
keyUsage = critical, digitalSignature, keyEncipherment
extendedKeyUsage = serverAuth

[client_cert]
basicConstraints = CA:FALSE
nsCertType = client, email
nsComment = "OpenSSL Generated Client Certificate"
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid,issuer
keyUsage = critical, nonRepudiation, digitalSignature, keyEncipherment
extendedKeyUsage = clientAuth, emailProtection

Firme certificados de servidor en su CA como este:

openssl ca -config openssl.cnf -extensions server_cert -notext -md sha256 -in csr.pem -out cert.pem

Firme certificados de cliente como este:

openssl ca -config openssl.cnf -extensions client_cert -notext -md sha256 -in csr.pem -out cert.pem

Luego en su cliente openvpn.cnfagregue la siguiente línea:

remote-cert-tls server

y reinicie el servicio openvpn.

jcoffland
fuente