He actualizado de 13.04 a 13.10 hoy y todo funciona sin problemas, excepto una cosa. Tengo una configuración de monitor dual y cada vez que reinicio las pantallas cambian de lugar (pantalla izquierda en monitor derecho y viceversa). He creado correctamente un xorg.conf que se muestra a continuación.
He probado todas las soluciones que se sugieren en estas dos publicaciones:
nvidia-settings perdido después de reiniciar
Los controladores de Nvidia parecen ignorar xorg.conf personalizado en 13.10? ¿Cómo configurarlo?
incluida la comprobación de ~/.config/monitor.xmllo que no tengo. Cargar la configuración de nvidia en tiempo de ejecución usando nvidia-settings -lque no hace nada. Pero eso tiene sentido para mí, ya .nvidia-setting-rcque realmente no tiene ninguna información sobre las posiciones de la pantalla. Y dado que estoy ejecutando LXDE como mi entorno de escritorio "Preferencias-> Configuración del monitor" solo se refiere a la resolución de la pantalla, no a la posición de la pantalla.
Ahora aquí está lo extraño: cuando lightdm se carga, las pantallas están inicialmente en el orden correcto (como se especifica en xorg.conf) y luego cambian de orden después de un par de segundos.
En mi Xorg.0.log encontré la siguiente línea
[ 11.806] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0"
que creo que bien podría ser el culpable. Parece que el controlador de nvidia anula la configuración en xorg.conf después del hecho a pesar de que no estoy iniciando la configuración de nvidia en el inicio hasta donde yo sé.
EDITAR:
Acabo de actualizar de nvidia-304 a nvidia-319 y ahora mis sospechas se confirmaron porque el registro de arranque del servidor x ahora está un poco más claro. Las líneas relevantes son:
[ 6.460] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1680+0, DFP: nvidia-auto-select +0+0"
Las opciones se leen correctamente desde xorg.conf
[ 6.908] (II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0"
y configurado correctamente
[ 11.197] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 11.222] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
y luego anulado por el controlador nvidia aparentemente sin razón alguna.
¿Alguna idea de alguien?
Cualquier ayuda sería muy apreciada.
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 304.88 (buildd@panlong) Thu Jul 11 10:40:14 UTC 2013
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 650 Ti"
Option "nvidiaXineramaInfoOrder" "DFP-1, CRT-0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1, CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +1680+0, DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
EDITAR 2:
Lo que descubrí es que el mensaje de registro que señala la anulación de la configuración de xorg.conf es causado por una llamada a xrandr (ya que lo estoy haciendo yo mismo desde la línea de comandos para configurar las pantallas en el orden correcto).
A continuación encontrará mi archivo de registro de x-server. Tenga en cuenta que las dos últimas entradas a aprox. 31.5 segundos son causados por llamar a xrandr desde la línea de comandos con la configuración correcta.
[ 6.376]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 6.376] X Protocol Version 11, Revision 0
[ 6.376] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 6.376] Current Operating System: Linux xyz 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64
[ 6.376] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=xyz ro splash quiet
[ 6.376] Build Date: 17 December 2013 10:06:15AM
[ 6.376] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[ 6.376] Current version of pixman: 0.30.2
[ 6.376] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.376] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.376] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 22 09:14:56 2014
[ 6.376] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.376] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.376] (==) ServerLayout "Layout0"
[ 6.377] (**) |-->Screen "Screen0" (0)
[ 6.377] (**) | |-->Monitor "Monitor0"
[ 6.377] (**) | |-->Device "Device0"
[ 6.377] (**) |-->Input Device "Keyboard0"
[ 6.377] (**) |-->Input Device "Mouse0"
[ 6.377] (**) Option "Xinerama" "0"
[ 6.377] (==) Automatically adding devices
[ 6.377] (==) Automatically enabling devices
[ 6.377] (==) Automatically adding GPU devices
[ 6.377] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 6.377] Entry deleted from font path.
[ 6.377] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 6.377] Entry deleted from font path.
[ 6.377] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 6.377] Entry deleted from font path.
[ 6.377] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 6.377] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 6.377] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6.377] (WW) Disabling Keyboard0
[ 6.377] (WW) Disabling Mouse0
[ 6.377] (II) Loader magic: 0x7f752fd38d20
[ 6.377] (II) Module ABI versions:
[ 6.377] X.Org ANSI C Emulation: 0.4
[ 6.377] X.Org Video Driver: 14.1
[ 6.377] X.Org XInput driver : 19.1
[ 6.377] X.Org Server Extension : 7.0
[ 6.377] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.378] (--) PCI:*(0:1:0:0) 10de:11c6:10b0:11c6 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 6.378] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.378] Initializing built-in extension Generic Event Extension
[ 6.378] Initializing built-in extension SHAPE
[ 6.378] Initializing built-in extension MIT-SHM
[ 6.378] Initializing built-in extension XInputExtension
[ 6.378] Initializing built-in extension XTEST
[ 6.378] Initializing built-in extension BIG-REQUESTS
[ 6.378] Initializing built-in extension SYNC
[ 6.378] Initializing built-in extension XKEYBOARD
[ 6.378] Initializing built-in extension XC-MISC
[ 6.378] Initializing built-in extension SECURITY
[ 6.378] Initializing built-in extension XINERAMA
[ 6.378] Initializing built-in extension XFIXES
[ 6.378] Initializing built-in extension RENDER
[ 6.378] Initializing built-in extension RANDR
[ 6.378] Initializing built-in extension COMPOSITE
[ 6.378] Initializing built-in extension DAMAGE
[ 6.378] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.378] Initializing built-in extension DOUBLE-BUFFER
[ 6.378] Initializing built-in extension RECORD
[ 6.378] Initializing built-in extension DPMS
[ 6.378] Initializing built-in extension X-Resource
[ 6.378] Initializing built-in extension XVideo
[ 6.378] Initializing built-in extension XVideo-MotionCompensation
[ 6.378] Initializing built-in extension SELinux
[ 6.378] Initializing built-in extension XFree86-VidModeExtension
[ 6.378] Initializing built-in extension XFree86-DGA
[ 6.378] Initializing built-in extension XFree86-DRI
[ 6.378] Initializing built-in extension DRI2
[ 6.378] (II) "glx" will be loaded by default.
[ 6.378] (WW) "xmir" is not to be loaded by default. Skipping.
[ 6.378] (II) LoadModule: "dri2"
[ 6.378] (II) Module "dri2" already built-in
[ 6.378] (II) LoadModule: "glamoregl"
[ 6.378] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 6.494] (II) Module glamoregl: vendor="X.Org Foundation"
[ 6.494] compiled for 1.14.3, module version = 0.5.1
[ 6.494] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.494] (II) LoadModule: "glx"
[ 6.494] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 6.533] (II) Module glx: vendor="NVIDIA Corporation"
[ 6.534] compiled for 4.0.2, module version = 1.0.0
[ 6.534] Module class: X.Org Server Extension
[ 6.534] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
[ 6.534] Loading extension GLX
[ 6.534] (II) LoadModule: "nvidia"
[ 6.534] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 6.539] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.539] compiled for 4.0.2, module version = 1.0.0
[ 6.539] Module class: X.Org Video Driver
[ 6.541] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
[ 6.541] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.541] (++) using VT number 7
[ 6.546] (II) Loading sub module "fb"
[ 6.546] (II) LoadModule: "fb"
[ 6.547] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.547] (II) Module fb: vendor="X.Org Foundation"
[ 6.547] compiled for 1.14.5, module version = 1.0.0
[ 6.547] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.547] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 6.547] (II) Loading sub module "wfb"
[ 6.547] (II) LoadModule: "wfb"
[ 6.548] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6.548] (II) Module wfb: vendor="X.Org Foundation"
[ 6.548] compiled for 1.14.5, module version = 1.0.0
[ 6.548] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.548] (II) Loading sub module "shadow"
[ 6.548] (II) LoadModule: "shadow"
[ 6.548] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 6.549] (II) Module shadow: vendor="X.Org Foundation"
[ 6.549] compiled for 1.14.5, module version = 1.1.0
[ 6.549] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.550] (II) Loading sub module "ramdac"
[ 6.550] (II) LoadModule: "ramdac"
[ 6.550] (II) Module "ramdac" already built-in
[ 6.550] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6.550] (==) NVIDIA(0): RGB weight 888
[ 6.550] (==) NVIDIA(0): Default visual is TrueColor
[ 6.550] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.550] (**) NVIDIA(0): Option "Stereo" "0"
[ 6.550] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP"
[ 6.550] (**) NVIDIA(0): Stereo disabled by request
[ 6.550] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1680+0, DFP: nvidia-auto-select +0+0"
[ 6.550] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.972] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 6.972] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 6.979] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 650 Ti (GK106) at PCI:1:0:0 (GPU-0)
[ 6.979] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 6.979] (--) NVIDIA(0): VideoBIOS: 80.06.21.00.18
[ 6.979] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6.980] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 650 Ti at PCI:1:0:0
[ 6.980] (--) NVIDIA(0): Samsung SyncMaster (CRT-0) (boot, connected)
[ 6.980] (--) NVIDIA(0): DFP-0
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 480.0 MHz maximum pixel clock
[ 6.981] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[ 6.981] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock
[ 6.981] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS
[ 6.981] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.981] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 6.981] (**) NVIDIA(0): has been enabled on all display devices.)
[ 6.981] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.981] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 6.981] (**) NVIDIA(0): has been enabled on all display devices.)
[ 6.982] (II) NVIDIA(0): Validated MetaModes:
[ 6.982] (II) NVIDIA(0):
[ 6.982] (II) NVIDIA(0): "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0"
[ 6.982] (II) NVIDIA(0): Virtual screen size determined to be 3360 x 1050
[ 7.003] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 7.003] (--) NVIDIA(0): option
[ 7.003] (--) Depth 24 pixmap format is 32 bpp
[ 7.003] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 7.003] (II) NVIDIA: access.
[ 7.007] (II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+1680+0,DFP:nvidia-auto-select+0+0"
[ 7.110] Loading extension NV-GLX
[ 7.165] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 7.165] (==) NVIDIA(0): Backing store disabled
[ 7.165] (==) NVIDIA(0): Silken mouse enabled
[ 7.165] (**) NVIDIA(0): DPMS enabled
[ 7.165] Loading extension NV-CONTROL
[ 7.166] Loading extension XINERAMA
[ 7.166] (II) Loading sub module "dri2"
[ 7.166] (II) LoadModule: "dri2"
[ 7.166] (II) Module "dri2" already built-in
[ 7.166] (II) NVIDIA(0): [DRI2] Setup complete
[ 7.166] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 7.166] (--) RandR disabled
[ 7.168] (II) SELinux: Disabled on system
[ 7.169] (II) Initializing extension GLX
[ 7.182] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 7.183] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.183] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.183] (II) LoadModule: "evdev"
[ 7.183] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.184] (II) Module evdev: vendor="X.Org Foundation"
[ 7.184] compiled for 1.14.1, module version = 2.7.3
[ 7.184] Module class: X.Org XInput Driver
[ 7.184] ABI class: X.Org XInput driver, version 19.1
[ 7.184] (II) Using input driver 'evdev' for 'Power Button'
[ 7.184] (**) Power Button: always reports core events
[ 7.184] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7.184] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.184] (--) evdev: Power Button: Found keys
[ 7.184] (II) evdev: Power Button: Configuring as keyboard
[ 7.184] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 7.184] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.184] (**) Option "xkb_rules" "evdev"
[ 7.184] (**) Option "xkb_model" "pc105"
[ 7.184] (**) Option "xkb_layout" "us"
[ 7.185] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7.185] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.185] (II) Using input driver 'evdev' for 'Power Button'
[ 7.185] (**) Power Button: always reports core events
[ 7.185] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 7.185] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.185] (--) evdev: Power Button: Found keys
[ 7.185] (II) evdev: Power Button: Configuring as keyboard
[ 7.185] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 7.185] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 7.185] (**) Option "xkb_rules" "evdev"
[ 7.185] (**) Option "xkb_model" "pc105"
[ 7.185] (**) Option "xkb_layout" "us"
[ 7.185] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.185] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 7.185] (II) No input driver specified, ignoring this device.
[ 7.185] (II) This device may have been added with another device file.
[ 7.185] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event3)
[ 7.185] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[ 7.185] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[ 7.185] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[ 7.185] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event3"
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[ 7.185] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[ 7.185] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[ 7.185] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[ 7.186] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[ 7.186] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[ 7.186] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input3/event3"
[ 7.186] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 8)
[ 7.186] (**) Option "xkb_rules" "evdev"
[ 7.186] (**) Option "xkb_model" "pc105"
[ 7.186] (**) Option "xkb_layout" "us"
[ 7.186] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[ 7.186] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[ 7.186] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event4)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 7.186] (II) No input driver specified, ignoring this device.
[ 7.186] (II) This device may have been added with another device file.
[ 7.186] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
[ 7.186] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 7.186] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 7.186] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 7.186] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc00e
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 7.186] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 7.186] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 7.186] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 7.187] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 7.187] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.187] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2/event2"
[ 7.187] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 7.187] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 7.187] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 7.187] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 7.187] (II) No input driver specified, ignoring this device.
[ 7.187] (II) This device may have been added with another device file.
[ 7.187] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[ 7.187] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 7.187] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 7.187] (**) Eee PC WMI hotkeys: always reports core events
[ 7.187] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[ 7.187] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 7.187] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 7.187] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 7.187] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event9"
[ 7.187] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 10)
[ 7.187] (**) Option "xkb_rules" "evdev"
[ 7.187] (**) Option "xkb_model" "pc105"
[ 7.187] (**) Option "xkb_layout" "us"
[ 7.423] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 7.423] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 7.423] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.423] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 7.423] (**) NVIDIA(0): has been enabled on all display devices.)
[ 7.429] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.429] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 7.429] (**) NVIDIA(0): has been enabled on all display devices.)
[ 7.739] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 7.764] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 7.818] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 7.818] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 7.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.818] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 7.818] (**) NVIDIA(0): has been enabled on all display devices.)
[ 7.824] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.824] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 7.824] (**) NVIDIA(0): has been enabled on all display devices.)
[ 31.488] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 31.488] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 31.488] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.488] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 31.488] (**) NVIDIA(0): has been enabled on all display devices.)
[ 31.497] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.497] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 31.497] (**) NVIDIA(0): has been enabled on all display devices.)
[ 31.507] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 31.555] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1680x1050 +1680+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}, DVI-D-0: nvidia-auto-select @1680x1050 +0+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
xorg
multiple-monitors
Cornelio
fuente
fuente
gdmRespuestas:
Recientemente instalé 14.04, y encontré exactamente el mismo problema. Intenté configurar las pantallas izquierda y derecha en el
nvidia-settingsadministrador, pero cuando reiniciaba o reiniciaba X, volvían a cambiar.Busqué mucho en línea, pero no pude encontrar una solución, luego solo fui a las opciones de Pantallas en Configuración del sistema Ubuntu o
unity-control-center, configuré todo allí, y listo, problema resuelto.Entonces, lo más fácil es ignorar
nvidia-settingsy usar la opción de visualización en la configuración de Ubuntu. Al menos en Ubuntu 14.04.fuente
Tuve el mismo problema en Ubuntu 14.04. Resultó que
xorg.conffue anulado por launity-control-centerconfiguración de pantallas que se almacenan en~/.config/monitors.xml.Ingresar la configuración deseada en
monitors.xmlresolvió el problema para mí.<primary>no</primary>o<primary>yes</primary><x>0</x>significa pantalla izquierda, pantalla<x>1280</x>derecha donde1280está el ancho de la pantalla a la izquierda.fuente
~/.config/monitors.xmlcompletoEl problema parece ser que lightdm restablece las pantallas a un orden que considere adecuado después de que se haya cargado xorg.conf. (Ahora no sé por qué o cómo suprimir eso y sería útil si algunos pudieran arrojar algo de luz sobre eso).
Entonces, para resolver este problema, la solución simple es cambiar el administrador de pantalla. Ver aquí
La solución más complicada si desea mantener lightdm es instalar arandr. Ejecutarlo. Configure sus pantallas como desee y guarde la configuración. Esto guardará un script de shell que configura su configuración cada vez que se ejecuta. Así que ahora tienes que agregar la siguiente línea a
/etc/lightdm/lightdm.confEsto le dará la configuración correcta del monitor tan pronto como ingrese a su sesión.
fuente
Tuve el mismo problema en 13.10 con Nvidia NVS 510 y 4 monitores. Aunque
nvidia-settingsse configuraron correctamente y se guardaron enxorg.confdespués de reiniciar, las opciones de rotación no se recordaron.La solución fue abrir Configuración del sistema → Pantallas y configurar los monitores nuevamente en la configuración adecuada. Luego haga clic en Aplicar. Supongo que esto es a lo que escribe
~/.config/monitors.xml.Después de eso, todo funcionó bien y persistió después del reinicio.
fuente
En realidad, hay una manera más fácil de resolver esto.
En su perfil de usuario, configure las pantallas exactamente como las quiere. Luego
Esto obligará a lightdm a usar exactamente la misma configuración que su perfil de usuario.
fuente
Tuve un problema similar , no multimonitor, pero mi configuración se ignoraba como la tuya. Lo que hice para resolverlo fue reemplazar la
nvidia-auto-selectopción con la resolución real que quería, es decir1280x1024_75 +0+0.Entonces, puede intentar algo como esto:
Además, noté que en la línea anterior, los monitores están en el orden "CRT-0, DFP-1", mientras que anteriormente en su archivo de configuración se ordenan "DFP-1, CRT-0". No sé si eso importa, pero estos flip-flops también pueden estar causando su problema, así que intente configurar todo en el mismo orden.
Lo que creo que me estaba sucediendo era que el nvidia x-server cargaría su configuración preferida, y luego sería anulada por el administrador de configuración. Al eliminar la selección automática (y cualquier otra opción de resolución disponible en
/etc/X11/xorg.conf), creo que no permite el uso de otras configuraciones de resolución.fuente
Pasé demasiado tiempo con exactamente el mismo problema: X carga la configuración correcta, luego, cuando inicio sesión, la configuración se sobrescribe.
Como estoy en una máquina de usuario único totalmente encriptada (y por lo tanto no me importa el inicio de sesión), mi opción era instalar
que reemplaza a lightdm u otros administradores de pantalla. Tiene que estar habilitado y configurado en
cargar al inicio y autoiniciar mi usuario. Solución perfecta con el increíble administrador de ventanas
fuente
Probablemente necesites ejecutar:
Ver:
fuente
Para los usuarios de xfce4, parece que el archivo
~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xmlpodría haber sido modificado por alguna razón. Eliminarlo resolvió mi problema. No se ha generado nuevamente al cerrar sesión / iniciar sesión, así que no sé exactamente qué se supone que debe hacer. También descubrí que con otros entornos de escritorio hay un~/.config/monitors.xmlarchivo similar (?) Que podría intentar eliminar / renombrar.Fuente
fuente
Tuve este problema con Ubuntu 19.04 y los controladores de Nvidia. 19.04 ahora usa GDM3 en lugar de LightDM por defecto.
La solución fue:
Use la configuración de Ubuntu para configurar las pantallas.
sudo cp ~/.config/monitors.xml /var/lib/gdm3/.config/sudo chown gdm:gdm /var/lib/gdm3/.config/monitors.xmlfuente