Dos micrófonos listados en la sección de entrada de Pulseaudio, "Micrófono interno" y "Micrófono" pero el problema es que

1

Estar en una computadora portátil, (Acer Aspire V3-571G para ser específico) Ubuntu 13.04, la selección del puerto "Micrófono interno", todo el ruido que se reproduce en el micrófono se reproduce a través de los altavoces. Al estar en la unidad, no puedo controlar qué puertos uso sin abrir manualmente el control de volumen de audio de pulso, y es un dolor. La selección del puerto 'Micrófono' usa el micrófono interno y externo cada vez que está conectado y no tiene este problema. No tengo más ideas sobre qué hacer.

pulseaudio --dump-conf:

daemonize = no
fail = yes
high-priority = yes
nice-level = -11
realtime-scheduling = yes
realtime-priority = 5
allow-module-loading = yes
allow-exit = yes
use-pid-file = yes
system-instance = no
local-server-type = user
cpu-limit = no
enable-shm = yes
flat-volumes = no
lock-memory = no
exit-idle-time = 20
scache-idle-time = 20
dl-search-path = /usr/lib/pulse-3.0/modules
default-script-file = /etc/pulse/default.pa
load-default-script-file = yes
log-target = auto
log-level = notice
resample-method = speex-float-1
enable-remixing = yes
enable-lfe-remixing = no
default-sample-format = s16le
default-sample-rate = 44100
alternate-sample-rate = 48000
default-sample-channels = 2
default-channel-map = front-left,front-right
default-fragments = 8
default-fragment-size-msec = 10
enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
deferred-volume-extra-delay-usec = 0
shm-size-bytes = 0
log-meta = no
log-time = no
log-backtrace = 0
rlimit-fsize = -1
rlimit-data = -1
rlimit-stack = -1
rlimit-core = -1
rlimit-rss = -1
rlimit-as = -1
rlimit-nproc = -1
rlimit-nofile = 256
rlimit-memlock = -1
rlimit-locks = -1
rlimit-sigpending = -1
rlimit-msgqueue = -1
rlimit-nice = 31
rlimit-rtprio = 9
rlimit-rttime = 1000000

amixer -c 0

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 69 [79%] [-13.50dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume penum
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 3 [100%] [36.00dB]
  Front Right: 3 [100%] [36.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined penum
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Beep',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch penum
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 24 [77%] [19.50dB] [on]
  Front Right: Capture 24 [77%] [19.50dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Internal Mic',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Internal Mic Boost',0
  Capabilities: volume penum
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]

pacmd list-sources

Welcome to PulseAudio! Use "help" for usage information.
>>> 2 source(s) available.
    index: 0
    name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
    driver: <module-alsa-card.c>
    flags: DECIBEL_VOLUME LATENCY 
    state: IDLE
    suspend cause: 
    priority: 1950
    volume: 0:   0% 1:   0%
            0: -inf dB 1: -inf dB
            balance 0.00
    base volume: 100%
                 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max rewind: 13 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    fixed latency: 80.00 ms
    monitor_of: 0
    card: 0 <alsa_card.pci-0000_00_1b.0>
    module: 4
    properties:
        device.description = "Monitor of Built-in Audio Analogue Stereo"
        device.class = "monitor"
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xb3a10000 irq 45"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1b.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
        device.form_factor = "internal"
        device.string = "0"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
  * index: 1
    name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
    state: SUSPENDED
    suspend cause: IDLE 
    priority: 9959
    volume: 0:  68% 1:  68%
            0: -9.89 dB 1: -9.89 dB
            balance 0.00
    base volume:   8%
                 -66.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    fixed latency: 80.00 ms
    card: 0 <alsa_card.pci-0000_00_1b.0>
    module: 4
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "ALC269VB Analog"
        alsa.id = "ALC269VB Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xb3a10000 irq 45"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1b.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
        device.form_factor = "internal"
        device.string = "front:0"
        device.buffering.buffer_size = "14112"
        device.buffering.fragment_size = "1764"
        device.access_mode = "mmap"
        device.profile.name = "analog-stereo"
        device.profile.description = "Analogue Stereo"
        device.description = "Built-in Audio Analogue Stereo"
        alsa.mixer_name = "Intel PantherPoint HDMI"
        alsa.components = "HDA:10ec0269,10250647,00100100 HDA:80862806,80860101,00100000"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    ports:
        analog-input-microphone-internal: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-microphone: Microphone (priority 8700, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
    active port: <analog-input-microphone>

Volúmenes de volcado de pacmd

Welcome to PulseAudio! Use "help" for usage information.
>>> Sink 0: reference = 0:  60% 1:  60%, real = 0:  60% 1:  60%, soft = 0: 100% 1: 100%, current_hw = 0:  60% 1:  60%, save = yes
    Input 19: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no
Source 0: reference = 0:   0% 1:   0%, real = 0:   0% 1:   0%, soft = 0: 100% 1: 100%, current_hw = 0:   0% 1:   0%, save = yes
Source 1: reference = 0:  68% 1:  68%, real = 0:  68% 1:  68%, soft = 0: 102% 1: 102%, current_hw = 0:  67% 1:  67%, save = yes

información de pactl

Server String: unix:/run/user/liam/pulse/native
Library Protocol Version: 27
Server Protocol Version: 27
Is Local: yes
Client Index: 181
Tile Size: 65472
User Name: liam
Host Name: liam-Aspire-V3-571G
Server Name: pulseaudio
Server Version: 3.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: cccb:95f3
13.04 sound pulseaudio microphone Lemagex
fuente
Agregué los resultados a mi pregunta.
Lemagex
Déjame aclarar esto, ¿estás recibiendo comentarios de lo que hablas a través de tu micrófono?
Braiam
cuando se establece en el puerto "micrófono interno", sí. cuando se establece en "micrófono" no. pero todavía usa mi micrófono interno para "micrófono", eso es lo que me está haciendo girar
Lemagex

Respuestas:

1

Pruebe:
pacmd set-source-port 2 'analog-input-microphone'
y luego:
pacmd set-default-source 2
para obtener más detalles, consulte esta publicación Mic no funciona .

yaron160
fuente