¿Existe una lista de todas las opciones de configuración posibles para lightdm?
10
Cada vez que quiero personalizar lightdm me resulta frustrante que no haya una lista obvia de opciones de configuración que pueda usar /etc/lightdm/lightdm.conf.
¿Quizás alguien aquí sabe dónde hay una lista definitiva de posibles opciones?
Encontré una lista una vez, y he estado luchando por encontrarla nuevamente, pero no tuve suerte. El enlace proporcionado por @Arcade es la referencia de los desarrolladores. ¡No puedo creer que no haya una lista clara de las opciones y lo que hacen! Debería haber una entrada para él ... pero, por desgracia, enviaron una versión de LTS sin documentación ... vea el error 883189
La documentación está disponible, vea mi respuesta a continuación.
Lamentablemente, ese documento parece estar desactualizado y lleno de mentiras.
ɈsәɹoɈ
10
Como referencia, lightdm.conf.gz contiene lo siguiente:
#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
#run-directory=/var/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=/usr/share/lightdm/greeters:/usr/share/xgreeters
#backup-logs=true
#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (xlocal, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=xlocal
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
#greeter-session=example-gtk-gnome
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
#session-wrapper=lightdm-session
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false
#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=
#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8
No hay una lista precisa de opciones disponibles. Encontrará una lista antigua en su sistema:
zless /usr/share/doc/lightdm/lightdm.conf.gz
Pero esa lista ha estado desactualizada desde al menos 2014, cuando el [Seat:0]mecanismo para especificar múltiples pantallas fue desaprobado y eliminado:
Con LightDM 1.11.7 tenemos un nuevo comportamiento para la configuración de múltiples asientos. Gracias al gran trabajo de Laércio de Sousa, LightDM ahora inicia asientos según lo definido por logind. Tomé la decisión de desaprobar el antiguo método manual de especificar asientos, ya que creo que es confuso tener dos sistemas que intenten definir qué asientos existen. ... Si anteriormente definía asientos en la configuración de LightDM de esta manera: [Seat:0]... Estos asientos no se iniciarán y esta configuración se ignorará.
es bueno saberlo, pero ya no uso un sistema basado en lightdm, así que no puedo confirmar a) qué es zless o que existe por defecto en un sistema basado en lightdm, o b) que su enlace contiene o contendrá reclamas, ahora o en el futuro imprevisto. (pista, cita la parte relevante aquí en tu respuesta).
airtonix
1
zlessforma parte del gzippaquete estándar que se instala en todos los sistemas Linux y BSD del mundo.
Respuestas:
Todos están disponibles aquí:
fuente
Como referencia, lightdm.conf.gz contiene lo siguiente:
fuente
No hay una lista precisa de opciones disponibles. Encontrará una lista antigua en su sistema:
Pero esa lista ha estado desactualizada desde al menos 2014, cuando el
[Seat:0]
mecanismo para especificar múltiples pantallas fue desaprobado y eliminado:http://lists.freedesktop.org/archives/lightdm/2014-August/000661.html
fuente
zless
forma parte delgzip
paquete estándar que se instala en todos los sistemas Linux y BSD del mundo.