Información del monitor de replicación usando T-SQL

Respuestas:

18

Después de hacer una búsqueda en línea, encontré lo que necesitabas, espero que mi respuesta te ayude.

respuesta 1

Nota:

Solo funciona con replicación transaccional y transaccional de igual a igual

Script T-SQL que puede usar para monitorear el estado de la replicación transaccional y el rendimiento de publicaciones y suscripciones.

Cosas a considerar antes de ejecutar el siguiente script

Requiere permiso en las siguientes tablas dentro de la distribución y las bases de datos maestras

  • MSdistribution_status
  • MSdistribution_agents
  • MSArticles
  • MSreplication_monitordata
  • MSdistribution_history
  • servidores
    USE [distribution]

    IF OBJECT_ID('Tempdb.dbo.#ReplStats') IS NOT NULL  
    DROP TABLE #ReplStats 

    CREATE TABLE [dbo].[#ReplStats](
    [DistributionAgentName] [nvarchar](100) NOT NULL,
    [DistributionAgentStartTime] [datetime] NOT NULL,
    [DistributionAgentRunningDurationInSeconds] [int] NOT NULL,
    [IsAgentRunning] [bit] NULL,
    [ReplicationStatus] [varchar](14) NULL,
    [LastSynchronized] [datetime] NOT NULL,
    [Comments] [nvarchar](max) NOT NULL,
    [Publisher] [sysname] NOT NULL,
    [PublicationName] [sysname] NOT NULL,
    [PublisherDB] [sysname] NOT NULL,
    [Subscriber] [nvarchar](128) NULL,
    [SubscriberDB] [sysname] NULL,
    [SubscriptionType] [varchar](64) NULL,
    [DistributionDB] [sysname] NULL,
    [Article] [sysname] NOT NULL,
    [UndelivCmdsInDistDB] [int] NULL,
    [DelivCmdsInDistDB] [int] NULL,
    [CurrentSessionDeliveryRate] [float] NOT NULL,
    [CurrentSessionDeliveryLatency] [int] NOT NULL,
    [TotalTransactionsDeliveredInCurrentSession] [int] NOT NULL,
    [TotalCommandsDeliveredInCurrentSession] [int] NOT NULL,
    [AverageCommandsDeliveredInCurrentSession] [int] NOT NULL,
    [DeliveryRate] [float] NOT NULL,
    [DeliveryLatency] [int] NOT NULL,
    [TotalCommandsDeliveredSinceSubscriptionSetup] [int] NOT NULL,
    [SequenceNumber] [varbinary](16) NULL,
    [LastDistributerSync] [datetime] NULL,
    [Retention] [int] NULL,
    [WorstLatency] [int] NULL,
    [BestLatency] [int] NULL,
    [AverageLatency] [int] NULL,
    [CurrentLatency] [int] NULL
    ) ON [PRIMARY]


    INSERT INTO #ReplStats 
    SELECT da.[name] AS [DistributionAgentName]
    ,dh.[start_time] AS [DistributionAgentStartTime]
    ,dh.[duration] AS [DistributionAgentRunningDurationInSeconds]
    ,md.[isagentrunningnow] AS [IsAgentRunning]
    ,CASE md.[status]
    WHEN 1 THEN '1 - Started'
    WHEN 2 THEN '2 - Succeeded'
    WHEN 3 THEN '3 - InProgress'
    WHEN 4 THEN '4 - Idle'
    WHEN 5 THEN '5 - Retrying'
    WHEN 6 THEN '6 - Failed'
    END AS [ReplicationStatus]
    ,dh.[time] AS [LastSynchronized]
    ,dh.[comments] AS [Comments]
    ,md.[publisher] AS [Publisher]
    ,da.[publication] AS [PublicationName]
    ,da.[publisher_db] AS [PublisherDB]
    ,CASE 
    WHEN da.[anonymous_subid] IS NOT NULL 
    THEN UPPER(da.[subscriber_name])
    ELSE UPPER (s.[name]) END AS [Subscriber]
    ,da.[subscriber_db] AS [SubscriberDB]
    ,CASE da.[subscription_type]
    WHEN '0' THEN 'Push'  
    WHEN '1' THEN 'Pull'  
    WHEN '2' THEN 'Anonymous'  
    ELSE CAST(da.[subscription_type] AS [varchar](64)) END AS [SubscriptionType]
    ,md.[distdb] AS [DistributionDB]
    ,ma.[article]    AS [Article]
    ,ds.[UndelivCmdsInDistDB] 
    ,ds.[DelivCmdsInDistDB]
    ,dh.[current_delivery_rate] AS [CurrentSessionDeliveryRate]
    ,dh.[current_delivery_latency] AS [CurrentSessionDeliveryLatency]
    ,dh.[delivered_transactions] AS [TotalTransactionsDeliveredInCurrentSession]
    ,dh.[delivered_commands] AS [TotalCommandsDeliveredInCurrentSession]
    ,dh.[average_commands] AS [AverageCommandsDeliveredInCurrentSession]
    ,dh.[delivery_rate] AS [DeliveryRate]
    ,dh.[delivery_latency] AS [DeliveryLatency]
    ,dh.[total_delivered_commands] AS [TotalCommandsDeliveredSinceSubscriptionSetup]
    ,dh.[xact_seqno] AS [SequenceNumber]
    ,md.[last_distsync] AS [LastDistributerSync]
    ,md.[retention] AS [Retention]
    ,md.[worst_latency] AS [WorstLatency]
    ,md.[best_latency] AS [BestLatency]
    ,md.[avg_latency] AS [AverageLatency]
    ,md.[cur_latency] AS [CurrentLatency]
    FROM [distribution]..[MSdistribution_status] ds 
    INNER JOIN [distribution]..[MSdistribution_agents] da
    ON da.[id] = ds.[agent_id]                          
    INNER JOIN [distribution]..[MSArticles] ma 
    ON ma.publisher_id = da.publisher_id 
    AND ma.[article_id] = ds.[article_id]
    INNER JOIN [distribution]..[MSreplication_monitordata] md
    ON [md].[job_id] = da.[job_id]
    INNER JOIN [distribution]..[MSdistribution_history] dh
    ON [dh].[agent_id] = md.[agent_id] 
    AND md.[agent_type] = 3
    INNER JOIN [master].[sys].[servers]  s
    ON s.[server_id] = da.[subscriber_id] 
    --Created WHEN your publication has the immediate_sync property set to true. This property dictates 
    --whether snapshot is available all the time for new subscriptions to be initialized. 
    --This affects the cleanup behavior of transactional replication. If this property is set to true, 
    --the transactions will be retained for max retention period instead of it getting cleaned up
    --as soon as all the subscriptions got the change. 
    WHERE da.[subscriber_db] <> 'virtual' 
    AND da.[anonymous_subid] IS NULL
    AND dh.[start_time] = (SELECT TOP 1 start_time
                    FROM [distribution]..[MSdistribution_history] a
                    JOIN [distribution]..[MSdistribution_agents] b
                    ON a.[agent_id] = b.[id] AND b.[subscriber_db] <> 'virtual'
                    WHERE [runstatus] <> 1
                    ORDER BY [start_time] DESC)
    AND dh.[runstatus] <> 1

    SELECT 'Transactional Replication Summary' AS [Comments];
    SELECT [DistributionAgentName]
    ,[DistributionAgentStartTime]
    ,[DistributionAgentRunningDurationInSeconds]
    ,[IsAgentRunning]
    ,[ReplicationStatus]
    ,[LastSynchronized]
    ,[Comments]
    ,[Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
    ,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
    ,[CurrentSessionDeliveryRate]
    ,[CurrentSessionDeliveryLatency]
    ,[TotalTransactionsDeliveredInCurrentSession]
    ,[TotalCommandsDeliveredInCurrentSession]
    ,[AverageCommandsDeliveredInCurrentSession]
    ,[DeliveryRate]
    ,[DeliveryLatency]
    ,[TotalCommandsDeliveredSinceSubscriptionSetup]
    ,[SequenceNumber]
    ,[LastDistributerSync]
    ,[Retention]
    ,[WorstLatency]
    ,[BestLatency]
    ,[AverageLatency]
    ,[CurrentLatency]
    FROM #ReplStats
    GROUP BY [DistributionAgentName]
    ,[DistributionAgentStartTime]
    ,[DistributionAgentRunningDurationInSeconds]
    ,[IsAgentRunning]
    ,[ReplicationStatus]
    ,[LastSynchronized]
    ,[Comments]
    ,[Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,[CurrentSessionDeliveryRate]
    ,[CurrentSessionDeliveryLatency]
    ,[TotalTransactionsDeliveredInCurrentSession]
    ,[TotalCommandsDeliveredInCurrentSession]
    ,[AverageCommandsDeliveredInCurrentSession]
    ,[DeliveryRate]
    ,[DeliveryLatency]
    ,[TotalCommandsDeliveredSinceSubscriptionSetup]
    ,[SequenceNumber]
    ,[LastDistributerSync]
    ,[Retention]
    ,[WorstLatency]
    ,[BestLatency]
    ,[AverageLatency]
    ,[CurrentLatency]

    SELECT 'Transactional Replication Summary Details' AS [Comments];
    SELECT [Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Article]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
    ,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
    FROM #ReplStats
    GROUP BY [Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Article]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]

Respuesta 2

Script_2 encontrado en MSDN

    --First you find the distributor servername using the below running in publisher
    Use master
    EXEC sp_helpdistributor;

    --Then you can run the below to find the type (use distributor database)

    SELECT 
    (CASE  
    WHEN mdh.runstatus =  '1' THEN 'Start - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '2' THEN 'Succeed - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '3' THEN 'InProgress - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '4' THEN 'Idle - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '5' THEN 'Retry - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '6' THEN 'Fail - '+cast(mdh.runstatus as varchar)
    ELSE CAST(mdh.runstatus AS VARCHAR)
    END) [Run Status], 
    mda.subscriber_db [Subscriber DB], 
    mda.publication [PUB Name],
    CONVERT(VARCHAR(25),mdh.[time]) [LastSynchronized],
    und.UndelivCmdsInDistDB [UndistCom], 
    mdh.comments [Comments], 
    'select * from distribution.dbo.msrepl_errors (nolock) where id = ' + CAST(mdh.error_id AS VARCHAR(8)) [Query More Info],
    mdh.xact_seqno [SEQ_NO],
    (CASE  
    WHEN mda.subscription_type =  '0' THEN 'Push' 
    WHEN mda.subscription_type =  '1' THEN 'Pull' 
    WHEN mda.subscription_type =  '2' THEN 'Anonymous' 
    ELSE CAST(mda.subscription_type AS VARCHAR)
    END) [SUB Type],

    mda.publisher_db+' - '+CAST(mda.publisher_database_id as varchar) [Publisher DB],
    mda.name [Pub - DB - Publication - SUB - AgentID]
    FROM distribution.dbo.MSdistribution_agents mda 
    LEFT JOIN distribution.dbo.MSdistribution_history mdh ON mdh.agent_id = mda.id 
    JOIN 
    (SELECT s.agent_id, MaxAgentValue.[time], SUM(CASE WHEN xact_seqno > MaxAgentValue.maxseq THEN 1 ELSE 0 END) AS UndelivCmdsInDistDB 
    FROM distribution.dbo.MSrepl_commands t (NOLOCK)  
    JOIN distribution.dbo.MSsubscriptions AS s (NOLOCK) ON (t.article_id = s.article_id AND t.publisher_database_id=s.publisher_database_id ) 
    JOIN 
    (SELECT hist.agent_id, MAX(hist.[time]) AS [time], h.maxseq  
    FROM distribution.dbo.MSdistribution_history hist (NOLOCK) 
    JOIN (SELECT agent_id,ISNULL(MAX(xact_seqno),0x0) AS maxseq 
    FROM distribution.dbo.MSdistribution_history (NOLOCK)  
    GROUP BY agent_id) AS h  
    ON (hist.agent_id=h.agent_id AND h.maxseq=hist.xact_seqno) 
    GROUP BY hist.agent_id, h.maxseq 
    ) AS MaxAgentValue 
    ON MaxAgentValue.agent_id = s.agent_id 
    GROUP BY s.agent_id, MaxAgentValue.[time] 
    ) und 
    ON mda.id = und.agent_id AND und.[time] = mdh.[time] 
    where mda.subscriber_db<>'virtual' -- created when your publication has the immediate_sync property set to true. This property dictates whether snapshot is available all the time for new subscriptions to be initialized. This affects the cleanup behavior of transactional replication. If this property is set to true, the transactions will be retained for max retention period instead of it getting cleaned up as soon as all the subscriptions got the change.
    --and mdh.runstatus='6' --Fail
    --and mdh.runstatus<>'2' --Succeed
    order by mdh.[time]

Respuesta 3

Script presentado en SimpleTalk TSQL como trabajo de agente.

Paso 1

Cree en una base de datos DBA instalada en el servidor del suscriptor. El código para crear la tabla es:

CREATE TABLE dbo.Replication_Qu_History(
            Subscriber_db varchar(50) NOT NULL,
            Records_In_Que numeric(18, 0) NULL,
            CatchUpTime numeric(18, 0) NULL,
            LogDate datetime NOT NULL,
        CONSTRAINT PK_EPR_Replication_Que_History PRIMARY KEY CLUSTERED
    (
            Subscriber_db ASC, LogDate DESC
    ) ON PRIMARY
    GO

Script 1

Los datos de esta tabla se completan con los procedimientos de monitoreo y proporcionan un contexto histórico para examinar los problemas. Pero para monitorear lo que está sucediendo ahora se requiere más.

Hay tres cosas que ayudan a determinar la salud de la replicación.

  • El estado de los trabajos relacionados con la replicación
  • La latencia (especialmente la latencia de distribución) medida por el contador Dist: Latencia de entrega

  • El número de comandos pendientes que están pendientes para la suscripción.

    DECLARE @cmd NVARCHAR(max)
DECLARE @publisher SYSNAME, @publisher_db SYSNAME, @publication SYSNAME, @pubtype INT
DECLARE @subscriber SYSNAME, @subscriber_db SYSNAME, @subtype INT
DECLARE @cmdcount INT, @processtime INT
DECLARE @ParmDefinition NVARCHAR(500)
DECLARE @JobName SYSNAME
DECLARE @minutes INT, @threshold INT, @maxCommands INT, @mail CHAR(1) = 'N'
SET @minutes = 60 --> Define how many minutes latency before you would like to be notified
SET @maxCommands = 80000  --->  change this to represent the max number of outstanding commands to be proceduresed before notification
SET @threshold = @minutes * 60

SELECT * INTO #PublisherInfo
FROM OPENROWSET('SQLOLEDB', 'SERVER=(LOCAL);TRUSTED_CONNECTION=YES;'
, 'SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublisher')

SELECT @publisher = publisher FROM #PublisherInfo     

SET @cmd = 'SELECT * INTO ##PublicationInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublication @publisher='
+ @publisher + ''')'
--select @cmd
EXEC sp_executesql @cmd

SELECT @publisher_db=publisher_db, @publication=publication, @pubtype=publication_type  FROM ##PublicationInfo

SET @cmd = 'SELECT * INTO ##SubscriptionInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelpsubscription @publisher='
+ @publisher + ',@publication_type=' + CONVERT(CHAR(1),@pubtype) + ''')'
--select @cmd
EXEC sp_executesql @cmd


ALTER TABLE ##SubscriptionInfo
ADD  PendingCmdCount INT NULL,
EstimatedProcessTime INT NULL

    Para verificar el estado de los trabajos de distribución

    DECLARE cur_sub CURSOR READ_ONLY FOR
SELECT @publisher, s.publisher_db, s.publication, s.subscriber, s.subscriber_db, s.subtype, s.distribution_agentname
FROM ##SubscriptionInfo s

OPEN cur_sub  
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName

WHILE @@FETCH_STATUS = 0  
BEGIN  
SET @cmd = 'SELECT @cmdcount=pendingcmdcount, @processtime=estimatedprocesstime FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorsubscriptionpendingcmds @publisher=' + @publisher
+ ',@publisher_db=' + @publisher_db + ',@publication=' + @publication
+ ',@subscriber=' + @subscriber + ',@subscriber_db=' + @subscriber_db
+ ',@subscription_type=' + CONVERT(CHAR(1),@subtype) + ';' + ''')'
SET @ParmDefinition = N'@cmdcount INT OUTPUT,
@processtime INT OUTPUT'
--select @cmd
EXEC sp_executesql @cmd,@ParmDefinition,@cmdcount OUTPUT, @processtime OUTPUT

UPDATE ##SubscriptionInfo
SET PendingCmdCount = @cmdcount
, EstimatedProcessTime = @processtime
WHERE subscriber_db = @subscriber_db

INSERT INTO DBA.dbo.Replication_Que_History
VALUES(@subscriber_db, @cmdcount, @processtime, GETDATE())
--  find out if the distribution job with the high number of outstanding commands running or not
--  if it is running then sometimes stopping and starting the agent fixes the issue
IF EXISTS(SELECT * FROM tempdb.INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME LIKE '##JobInfo%')
DROP TABLE ##JobInfo

SET @cmd = 'SELECT * INTO ##JobInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC msdb.dbo.sp_help_job @job_name='''''
+ @JobName + ''''',@job_aspect=''''JOB'''''')'
EXEC sp_executesql @cmd

IF @cmdcount > @maxCommands OR (@processtime > @threshold AND @cmdcount > 0)
BEGIN
IF (SELECT current_execution_status FROM ##JobInfo) = 1 --  This means job is currently executing so stop/start it
BEGIN
EXEC distribution.dbo.sp_MSstopdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
WAITFOR DELAY '00:00:05' ---- 5 Second Delay
SET @mail = 'Y' 
END
END   
--SELECT name, current_execution_status FROM ##JobInfo
IF (SELECT current_execution_status FROM ##JobInfo) <> 1 -- if the job is not running start it
BEGIN
EXEC distribution.dbo.sp_MSstartdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
SET @mail = 'Y'      -- Send email if job has stopped and needed to be restarted
END   
DROP TABLE ##JobInfo
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
END  

CLOSE cur_sub  
DEALLOCATE cur_sub

    Ejecute el procedimiento proporcionado por Microsoft sp_replmonitorsubscriptionpendingcmds

    --system stored procedure to run in distribution database
execute sp_replmonitorsubscriptionpendingcmds
--replication publisher server
@publisher ='PubServer',
--replication publisher database
@publisher_db = 'ProdDBPub',
--replication publication name
@publication ='ProdDBSub',
--replication subscriber server
@subscriber ='SubServer',
--replication subscriber database
@subscriber_db ='ProdDBSub1',
--choose type of subscription you have
@subscription_type ='1' --0 for push and 1 for pull
GO

El siguiente código requiere que la opción de configuración del servidor Ad Hoc Distributed Queries esté habilitada. Aquí creo el correo electrónico que se enviará asumiendo que el Script 3 anterior encontró un problema sp_replmonitorsubscriptionpendingcmds.

        IF @mail = 'Y'
        BEGIN
        DECLARE @msg VARCHAR(MAX) = 'Replication on ' + @@SERVERNAME
        + ' may be experiencing some problems.  Attempts to restart the distribution agent have been made. '
        + 'If this is not the first message like this that you have received within the last hour, please investigate.'
        DECLARE @body NVARCHAR(MAX)
        DECLARE @xml1 NVARCHAR(MAX)
        DECLARE @tab1 NVARCHAR(MAX)
        DECLARE @xml2 NVARCHAR(MAX)
        DECLARE @tab2 NVARCHAR(MAX)

        SET @xml1 = CAST(( SELECT subscriber AS 'td','',subscriber_db AS 'td','',
        latency AS 'td','', PendingCmdCount AS 'td','', EstimatedProcessTime AS 'td'
        FROM  ##SubscriptionInfo s
        FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))

        SET @tab1 ='<html><body><H4>Subscription Information </H4>
        <table border = 1> <tr>
        <th> Subscriber </th> <th> Subscriber Database </th> <th> Latency(seconds)</th>
        <th> Undistributed Commands </th> <th> Estimated Catch Up Time</th></tr>'   
        --  this command gives us the last 10 measurements of latency for each subscriber
        SET @xml2 = CAST(( SELECT s.Subscriber_db AS 'td','', s.Records_In_Que AS 'td','', s.CatchUpTime AS 'td','', CONVERT(CHAR(22),LogDate, 100) AS 'td'
        FROM (SELECT ROW_NUMBER() OVER ( PARTITION BY subscriber_db ORDER BY Logdate DESC ) AS 'RowNumber',
        subscriber_db
        , Records_In_Que
        , CatchUpTime
        , Logdate
        FROM DBA.dbo.Replication_Que_History
        ) s
        WHERE RowNumber <= 8
        FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))

        SET @tab2 ='<br><br><H4>Historical Latency Information </H4>
        <table border = 1>
        <tr>
        <th>Subscriber</th> <th>Undistributed Commands</th> <th> Catch Up Time </th> <th> Date\Time </th></tr>'

        SET @body = @msg + @tab1 + @xml1 + '</table>'
        + @tab2 + @xml2 + '</body></html>'

        DECLARE @to NVARCHAR(200)
        SELECT @to = '' -- INSERT YOUR EMAIL ADDRESS HERE
        EXEC msdb.dbo.sp_send_dbmail
        @body = @body,
        @body_format ='HTML',
        @recipients = @to,
        @subject = 'Possible Replication Problem' ;
        END
        DROP TABLE #PublisherInfo
        DROP TABLE ##PublicationInfo
        DROP TABLE ##SubscriptionInfo

El último proceso es eliminar periódicamente las filas de la tabla de estado de replicación para que los datos no se vuelvan obsoletos

DECLARE @delDate datetime = getdate()-10
  DELETE FROM DBA.dbo.Replication_Que_History
  WHERE LogDate < @deldate

Por favor, tenga en cuenta que también noté que hay un problema con sp_replmonitorsubscriptionpendingcmds si todavía está con SQL Server 2005 y 2008 Microsoft Connect

Si alguna de las respuestas anteriores no está clara, puede seguir la fuente que he proporcionado

¡Gracias!

Heisenberg
fuente
1
Este es el hombre de oro! ¡maravilloso!
Marcello Miorelli
1
@marcelomiorelli ¡No hay problema y gracias! Porque esta comunidad siempre se trata de ayudarse mutuamente :)
Heisenberg
2
No sé por qué esto solo tiene un voto a favor, tengo más.
ConstantineK
3

Puede obtener la información que necesita consultando la tabla dbo.MSReplication_monitordata desde una base de datos de distribución con este script, para todas las publicaciones:

USE distribution
SELECT status AS ReplicationAgentsStatus 
FROM dbo.MSReplication_monitordata
WHERE publication = 'ALL'

Para una publicación particular, modifique 'ALL' en la declaración WHERE

Además, puede usar este script de PowerShell para filtrar la columna de estado del procedimiento almacenado del sistema sp_replmonitorhelppublication:

Invoke-Sqlcmd -Query "USE distribution
EXEC sp_replmonitorhelppublication" -ServerInstance "TIKVICKI" | Out-File d:\temp1.txt


Get-Content d:\temp1.txt | where { $_.Contains("status : ") } | 
out-file d:\temp2.txt


(Get-Content d:\temp2.txt).replace('status ', 'Replication agents 
status') | 
Set-Content d:\Replication_Agents_Status_$(get-date -f yyyy-MM-dd-hh-mm-ss).txt

Remove-Item d:\temp1.txt -Force
Remove-Item d:\temp2.txt -Force

Encontré estos scripts en este artículo, que también describe cómo hacer esto a través de la interfaz de usuario con una herramienta de terceros o SSMS.

Mspaja
fuente